View CDQ6004-QS-0G00_3993608.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2008 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. may 2008 - rev 01-may-08 0.05-4.0 ghz dual high dynamic range amplifier page 1 of 11 features matched pair of amplifiers for optimum balanced design 0.05 to 4.0 ghz frequency range 44 dbm output ip3 (balanced configuration) 41 dbm output ip3 (single-ended configuration) 15 db gain @ 2 ghz 23 dbm p1dbm 2.1 db noise figure rohs compliant 4x4 qfn package single positive supply +3v to +5v voltage rail supply voltage rf input power* storage temperature (tstg) junction temperature operating temperature thermal resistance +6.0 v +20 dbm -55 oc to +125 oc 150 oc -40 oc to +85oc 52 oc/w absolute maximum ratings operation of this device above any of these parameters may cause damage. *operation with more than 10 dbm of input power may cause 2 db degradation in oip3 performance. frequency range gain input return loss output return loss output ip3 noise figure output p1db 0.9 16.5 -13 -16 42 2.1 +23 2 15 -11 -12 41 2.1 +23 2.4 14.9 -20 -11 40.5 2.6 +24 ghz db db db dbm db dbm typical parameters typical values reflect performance in recommended application circuit @ +5v. cdq6004-qs general description the cdq6004-qs is a dual high dynamic range amplifier designed for applications operation within the 0.05 to 4.0 ghz frequency range. co-located matched amplifiers are assembled in the 4mm x 4mm qfn package. the low-cost, surface-mount, 16 terminal, plastic package is rohs compliant. the cdq6004-qs is an ideal solution for implementing balanced or push-pull designs. the amplifier can also be used for dual-band operation where single-ended design is used for each band. the amplifier has the flexibility of being optimized for a number of wireless applications. the combination of low noise figure and high ip3 at the same bias point make it an ideal transmit or receive solution when used in applications including catv operating from 50 to 850 mhz, cellular and pcs (personal communications service) operating from 0.8 to 2.2 ghz; mmds (multichannel multipoint distribution systems) operating from 2.2 to 2.7 ghz; and wlan (wireless lan) operation at 2.4 ghz. all devices are 100% rf and dc tested. electrical characteristics (t = 25oc) parameter condition frequency range gain input return loss output return loss output ip3 noise figure output p1db operating current range supply voltage externally matched externally matched externally matched units ghz db db db dbm db dbm ma v min. 0.25 13.5 38 130 typ. 15 -10 -10 41 2.1 23 160 5.0 max. 3.0 200 unless otherwise specified, the following specifications are guaranteed at room temerpature in a mimix fixture. notes: 1. t = 25oc, frequency = 2 ghz, 50 ohm system. 2. each single ended amplifier is tested separately. 3. oip3 is measured with two tones at output power of 5 dbm/tone separated by 10 mhz. 4. slight performance degredation is expected over temperature. parameter typical units
page 2 of 11 typical device s-parameters cdq6004-qs cdq6004-qs s21 vs voltage 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 012345678910 frequency (ghz) (db) s21 3v s21 4v s21 5v cdq6004-qs s12 vs voltage -30 -25 -20 -15 -10 -5 0 012345678910 frequency (ghz) (db) s12 3v s12 4v s12 5v cdq6004-qs s22 vs voltage -20 -18 -16 -14 -12 -10 -8 -6 -4 -2 0 2 4 6 8 10 12 14 16 18 20 012345678910 frequency (ghz) (db) s22 3v s22 4v s22 5v cdq6004-qs s11 vs voltage -10 -9 -8 -7 -6 -5 -4 -3 -2 -1 0 1 2 3 4 5 6 7 8 9 10 012345678910 frequency (ghz) (db) s11 3v s11 4v s11 5v 0.05-4.0 ghz dual high dynamic range amplifier mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2008 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. may 2008 - rev 01-may-08
page 3 of 11 application circuit @ 900 mhz schematic: board layout: 0.05-4.0 ghz dual high dynamic range amplifier cdq6004-qs frequency range gain input return loss output return loss output ip3 noise figure output p1db 0.9 16.5 -13 -16 42 2.1 23 ghz db db db dbm db dbm typical performance: parameter typical units ref designator c2, c4, c6, c8 c1, c5 c3, c7 l1, l2 l3, l4 value 2.7 pf 1.5 pf 1000 pf 47 nh 6.8 nh size 0402 0603 0805 0805 0603 components cdq6004-qs evaluatio n bo ard @ 900mhz vd =5 v -20 -15 -10 -5 0 5 10 15 20 00.5 11.5 2 fre que nc y (ghz) -25 -15 -5 5 15 gain input return loss output return loss mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2008 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. may 2008 - rev 01-may-08 * material: fr4, 28 mil * plating: 1.5 oz. copper both sides
page 4 of 11 typical performance @ 900 mhz (50 ohm system over voltage) cdq6004-qs cdq6004-qs evaluation board @ 0.9ghz gain over voltage 0 2 4 6 8 10 12 14 16 18 20 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 frequency (ghz) gain (db) vd=2v vd=3v vd=4v vd=5v cdq6004-qs evaluation board @ 0.9ghz input return loss (s11) over voltage -25 -20 -15 -10 -5 0 00.511.522.533.544.555.56 frequency (ghz) return loss (db) vd=2v vd=3v vd=4v vd=5v cdq6004-qs evaluation board @ 0.9ghz output return loss (s22) over voltage -25 -20 -15 -10 -5 0 00.511.522.533.544.555.56 frequency (ghz) return loss (db) vd=2v vd=3v vd=4v vd=5v cdq6004-qs evaluation board @ 900mhz p1db over voltage 12 14 16 18 20 22 24 26 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 drain voltage (v) p1db (dbm) cdq6004-qs evaluation board @ 900mhz oip3 over voltage 24 26 28 30 32 34 36 38 40 42 44 1.52.02.53.03.54.04.55.05.5 drain voltage (v) oip3 (dbm) cdq6004-qs evaluation board @ 900mhz noise figure over voltage 1.6 1.8 2.0 2.2 2.4 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 drain voltage (v) nf(db) 0.05-4.0 ghz dual high dynamic range amplifier mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2008 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. may 2008 - rev 01-may-08
page 5 of 11 application circuit @ 1.9 ghz ~ 2.1 ghz: cdq6004-qs schematic: board layout: frequency range gain input return loss output return loss output ip3 noise figure output p1db 1.9 15.3 -11.9 -16.3 41 2.1 23 2.1 15.0 -12.5 -13.6 41.3 2.1 23 ghz db db db dbm db dbm typical performance: parameter typical units 0.05-4.0 ghz dual high dynamic range amplifier cdq6004-qs evaluatio n board @ 1 . 9ghz 2 . 1g h z vd =5 v -20 -15 -10 -5 0 5 10 15 20 00.5 1 1. 5 2 2.5 3 fre que nc y (ghz) -25 -15 -5 5 15 gain input return loss output return loss ref designator c2, c4, c6, c8 c1, c5 c3, c7 l1, l2 value 100 pf 1.5 pf 1000 pf 47 nh size 0402 0603 0805 0805 components mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2008 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. may 2008 - rev 01-may-08 * material: fr4, 28 mil * plating: 1.5 oz. copper both sides
page 6 of 11 typical performance @ 1.9 ghz (50 ohm system over voltage) cdq6004-qs cdq6004-qs evaluation board @ 1.9 ~ 2.1 gain over voltage 0 2 4 6 8 10 12 14 16 18 20 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 frequency (ghz) gain (db) vd=2v vd=3v vd=4v vd=5v cdq6004-qs evaluation board @ 1.9~2.1ghz input return loss (s11) over voltage -25 -20 -15 -10 -5 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 frequency (ghz) return loss (db) vd=2v vd=3v vd=4v vd=5v cdq6004-qs evaluation board @ 1.9~2.1ghz output return loss (s22) over voltage -25 -20 -15 -10 -5 0 00.511.522.533.544.555.56 frequency (ghz) return loss (db) vd=2v vd=3v vd=4v vd=5v cdq6004-qs evaluation board@1.9ghz p1db over voltage 12 14 16 18 20 22 24 26 1.52.02.53.03.54.04.55.05.5 drain voltage (v) p1db (dbm) cdq6004-qs evaluation board @ 1.9ghz oip3 over voltage 24 26 28 30 32 34 36 38 40 42 44 1.52.02.53.03.54.04.55.05.5 drain voltage (v) oip3(dbm) cdq6004-qs evaluation board @ 1.9ghz noise figure over voltage 1.6 1.8 2.0 2.2 2.4 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 drain voltage (v) nf (db) 0.05-4.0 ghz dual high dynamic range amplifier mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2008 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. may 2008 - rev 01-may-08
page 7 of 11 application circuit @ 2.4 ghz: schematic: board layout: cdq6004-qs frequency range gain input return loss output return loss output ip3 noise figure output p1db 2.4 14.9 -20 -11 40.5 2.6 24 ghz db db db dbm db dbm typical performance: parameter typical units 0.05-4.0 ghz dual high dynamic range amplifier cdq6004-qs evaluatio n bo ard @ 2.4ghz vd=5 v -20 -15 -10 -5 0 5 10 15 20 0 0.5 1 1.5 2 2.5 3 3.5 fre que nc y (ghz) -25 -15 -5 5 15 gain input return loss output return loss ref designator c2, c4, c6, c8 c1, c5 c3, c7 l1, l2 value 2.7 pf 1.2 pf 1000 pf 47 nh size 0402 0603 0805 0805 components mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2008 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. may 2008 - rev 01-may-08 * material: fr4, 28 mil * plating: 1.5 oz. copper both sides
page 8 of 11 typical performance @ 2.4 ghz (50 ohm system over voltage) cdq6004-qs evaluation board @ 2.4ghz gain over voltage 0 2 4 6 8 10 12 14 16 18 20 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 frequency (ghz) gain (db) vd=2v vd=3v vd=4v vd=5v cdq6004-qs evaluation board @ 2.4ghz input return loss (s11) over voltage -25 -20 -15 -10 -5 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 frequency (ghz) return loss (db) vd=2v vd=3v vd=4v vd=5v cdq6004-qs evaluation board @ 2.4ghz output return loss (s22) over voltage -25 -20 -15 -10 -5 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 frequency (ghz) return loss (db) vd=2v vd=3v vd=4v vd=5v cdq6004-qs evaluation board @ 2.4ghz p1db over voltage 12 14 16 18 20 22 24 26 1.52.02.53.03.54.04.55.05.5 drain voltage (v) output p1db(dbm) cdq6004-qs evaluation board @ 2.4ghz oip3 over voltage 22 24 26 28 30 32 34 36 38 40 42 44 46 48 1.52.02.53.03.54.04.55.05.5 drain voltage (v) oip3(dbm) cdq6004-qs evaluation board @ 2.4ghz noise figure over voltage 2.0 2.2 2.4 2.6 2.8 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 drain voltage (v) nf(db) cdq6004-qs 0.05-4.0 ghz dual high dynamic range amplifier mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2008 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. may 2008 - rev 01-may-08
page 9 of 11 functional block diagram pin out detail physical dimensions cdq6004-qs 5 8 16 13 1,2,3,4 9,10,11,12 6,7,14,15 in 1 in 2 out 1 out 2 vs 1 vs 2 gnd amplifier 1 rf input amplifier 2 rf input amplifier 1 rf output amplifier 2 rf output amplifier 1 source connection amplifier 2 source connection main heat-sinking connection pin function description 0.05-4.0 ghz dual high dynamic range amplifier 0.65 1.00 a2 0 e e2 l d2 e k b d 0.35 0.20 2.50 0.25 4.00 bsc 0.40 0.45 2.65 2.80 0.65 -- 0.30 0.35 4.00 bsc nom 0.20 ref min a3 0.80 a max 0.90 1.00 2.50 2.65 2.80 a3 a2 die a d e b d2 k e2 e l wafer lot number date code (year/week) country of origin (if other than usa) 100% matte tin mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2008 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. may 2008 - rev 01-may-08
page 10 of 11 cdq6004-qs 0.05-4.0 ghz dual high dynamic range amplifier mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2008 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. mttf these numbers were calcu lated based on accelerated life test information received from the fabrication foundry and measured thermal resistance. cdq6004-qs v d=5.0 v, i d=150 ma 1.0e+06 1.0e+07 1.0e+08 1.0e+09 60 70 80 90 100 110 backplate temperature (deg c) mttf (hours) cdq6004-qs v d=5.0 v, i d=150 ma 0 20 40 60 80 100 120 140 160 40 50 60 70 80 90 100 110 backplate temperature (deg c) tch (deg c) may 2008 - rev 01-may-08
page 11 of 11 handling and assembly information caution! - mimix broadband mmic products contain gallium arsenide (gaas) which can be hazardous to the human body and the environment. for safety, observe the following procedures: do not ingest. do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed. observe government laws and company regulations when discarding this product. this product must be discarded in accordance with methods specified by applicable hazardous waste procedures. life support policy - mimix broadband's products are not authorized for use as critical components in life support devices or systems without the express written approval of the president and general counsel of mimix broadband. as used herein: (1) life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) a critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. package attachment - this packaged product from mimix broadband is provided as a rugged surface mount package compatible with high volume solder installation. care should be taken not to apply heavy pressure to the top or base material to avoid package damage. vacuum tools or other suitable pick and place equipment may be used to pick and place this part. care should be taken to ensure that there are no voids or gaps in the solder connection so that good rf, dc and ground connections are maintained. voids or gaps can eventually lead not only to rf performance degradation, but reduced reliability and life of the product due to thermal stress. mimix lead-free rohs compliant program - mimix has an active program in place to meet customer and governmental requirements for eliminating lead (pb) and other environmentally hazardous materials from our products. all mimix rohs compliant components are form, fit and functional replacements for their non-rohs equivalents. lead plating of our rohs compliant parts is 100% matte tin (sn) over copper alloy and is backwards compatible with current standard snpb low-temperature reflow processes as well as higher temperature (260c reflow) ?pb free? processes. cdq6004-qs 0.05-4.0 ghz dual high dynamic range amplifier ordering i nformation part number for ordering description matte tin plated rohs compliant qfn4x4 16l surface mount package in bulk quantity matte tin plated rohs compliant qfn4x4 16l surface mount package in tape and reel cdq6004-qs evaluation board @ 900 mhz cdq6004-qs evaluation board @ 1.9 ghz~2.1 ghz cdq6004-qs evaluation board @ 2.4 ghz CDQ6004-QS-0G00 cdq6004-qs-0g0t pb-cdq6004-qs-00a0 pb-cdq6004-qs-00b0 pb-cdq6004-qs-00c0 we also offer this product with snpb (tin-lead) or nipdau plating. please contact your regional sales manager for more informat ion regarding different plating types. mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2008 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. may 2008 - rev 01-may-08

▲Up To Search▲

Price & Availability of CDQ6004-QS-0G00

	To Download CDQ6004-QS-0G00 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .